Hello, I know. It's probably utopic, but I'm looking for a monthly export of the remote IPs for all BOVPN tunnels, from the main Firebox. If possible: - Automatic (scheduled) - Sent to an email - Having only the tunnel name and the remote IP Would there be any way to come close to this? Thanks, Marc
I try to configure a T125W with a zero-route BOVPNVif and guest-wifi. BOVPNVif works and everything is connected with the HQ but when I connect a client with the guest-wifi, it is not possible to open a website. All traffic will be routed to BovpnVif. Also when I activate SD-WAN. When I put Any in the To-Field, I am able…
Hi there, following setting: HQ (192.168.31.0/16) + SSLVPN-Users (192.168.113.0/24) ←BOVPN iKEV2→ BranchOffice (10.0.11.0/24) After a while one of the two routes from HQ to BranchOffice randomly stops working. If i add another route (inactive one, not present on other side), its starts working again but fails some time…
Good morning, we have a working BOVPN with a place that uses the 192.168.8.0/24 subnet. Now a federal agency, which we are connected to via static routes, changed the address of one of their servers to 192.168.8.38. Is there a way I can add a static route to the 192.168.8.38 host without having to redo the BOVPN / external…
We have a dedicated External P address hosted at our home office that points to a server that is running HTTPS web services at a branch site. When we set the source IP address the connection will work for 30 to 40 minutes and then it stops working . If we change the source IP address to another IP address it works again.…
Hi All I'd like to setup a point to point VPN using a T35-R and a Starlink at each end. (trying to create a secure network between two very remote locations, no fixed lines and very poor 3G/4G coverage) Starlinks are currently both in "bypass" mode so the WAN ports on both the T35-R see the Starlink CGNAT IP of 100.x.x.x…
Hello, we got a lot of trouble with the new T145 and Fireware 2025.1.2. So far we did a lot of tests and every time we have the same problem with the VPN Upload (BOVPN and MUVPN speed. What we did and tried so far: 1. Took the configuration file from a functional T55 with Fireware 12.11.4. Changed the Firewall model and…
Hello, Today i have changed cluster of T55 with a cluster of T125. After boot, the bovpn to another Watchgard M390 on Datacenter it’s worked fine, but after an hour, a lot of pc cannot connect to server on Datacenter, someome work other no. The problem seem to a mtu issue, Anyone have the same problem ?
Hi I have a BoVPN tunnel between two fireboxes up and running. Interface 1 on the remote firebox has Ip 192.168.71.100. I am trying to ping it from 192.168.21.199 and do not hear back. The route is 192.168.21.0 - 192.168.71.0 bidirectional. I also have a BoVPN allow policy from the tunnel to any. Below is what I get from…
Hello everyone in the forum, I am currently trying to establish an IPsec IKEv2 connection between an OPNsense firewall and a Fritzbox. However, the connection setup is not working and I get the error message "no proposal sent". Does anyone perhaps have a guide or instructions on what I need to configure in the OPNsense…
It looks like you're new here. Sign in or register to get started.