Comments
-
I'll give the compare add in a try. Beyond File compare works also; but it just gives you a line by line compare.
-
Hi James I'm not using the box's DHCP for anything (other than assigning IP on firebox inbound VPN connections) I've opened a ticket on the issues I've seen. Will post any feedback Paul
-
Hi XXUP, Duh. Should of thought of restoring a firmware backup :-) Never used the "restore from internal backup" b4 as I've never Rolled back a firmware (I do usually manually backup the firmware to local PC on upgrades). I've checked and have a firmware on the firebox just before the 12.6.2 upgrade. Will look to use this…
-
Just a follow up.. Turning App control off actually didn't solve the issue (Errors and slowness still where there when I re-tested just a little while ago). I had setup a firebox-db user attached to a ANY packet filter which when logged into the firebox-db user, the issue then went away Sorry for the confusion. Paul PS.…
-
Just doing that now. Thanks Bruce!
-
Yep.. Clear now that you pointed it out :-) But in my defense... my brains a frazzled pile of goo from my many dealings with vendor frazzled software releases. Again, thanks for the reply!
-
....not meet WatchGuard’s standards of quality, based on the number of reported issues... Yep! Thought I was going nutty. Glad it aint me (well at least not this time) Off to downgrade-vill Thanks Bruce!
-
Oh no.. Please ignore the double posts as I thought they hadn't posted as they were still sitting in the drafts section waiting to be approved Hopefully not double posting going forward. Paul
-
Hi All I tried to post the message (think on the 20th), but it was stuck in a pending que awaiting authorization (looks like the 23rd). Was like this for a few days, and so opened a ticket directly with Watchguard; but it was slow to solve (so also posted something spice works - Hi Bruce!) Just came back in today, and saw…
-
Please ignore this (was sitting in Drafts for the last few days). Watchguard support is looking into fixing so I can post without have to wait 3+ for approval.. Aside: Issue righted itself after a bit. The machine was in "You need to activate due to hardware missmatch" (had just swapped out a Raid6 for a raid10 SSD just…
-
Aside: Please note, that I still seem to require approval for any message I post -> "Your comment will appear after it is approved." Hopefully this wont go on for too long, as I have been active in watchguard old forums for 7-10 years, and the only thing thats different is the new forum. Its kinda a kick in the pants when…
-
Hi All I tried to post the message (think on the 20th), but it was stuck in a pending que awaiting authorization (looks like the 23rd). Was like this for a few days, and so opened a ticket directly with Watchguard; but it was slow to solve (so also posted something spice works - Hi Bruce!) Just came back in today, and saw…
-
Hi All I tried to post the message (think on the 20th), but it was stuck in a pending que awaiting authorization (looks like the 23rd). Was like this for a few days, and so opened a ticket directly with Watchguard; but it was slow to solve (so also posted something spice works - Hi Bruce!) Just came back in today, and saw…