Options
Domain option missing from Firebox webinterface
Hi,
M370 cluster 12.7.2
After messing around with authenticated to get AuthPoint working on my clsuters one of them suddenly are missing the Domain: option on the webinterface to select which auth domain to use.
Chaning the Default authentication server to use on the authentication page do not help.
Picture van be seen here:
[https://1drv.ms/u/s!AuOwdE3caya8heoyObuh4e8-U1-ZfQ?e=raEPB0]
I have not had a change to try to do a failover yet to see if this solves it.
Anybody seen this before?
/Robert
0
Sign In to comment.
Comments
I have opened a case, 01619709
Hi @rv@kaufmann.dk
This is likely related to a bug that was filed for 12.7.1 (FBX-22048)
In policy manager, please try doing the following:
-Go to Setup -> Authentication -> Authentication Settings.
-Near the bottom of the "Firewall Authentication" tab, find "Management Session"
-Change the "Default authentication server used to log into Fireware WebUI to anything else, click OK, and save to the firewall.
-Go back and put the setting to what you had it as before, and save to the firewall.
You can also do this in authentication -> settings in WebUI if preferred.
If that corrects the issue, so long as you're on 12.7.2 or better the issue should not happen again.
-James Carson
WatchGuard Customer Support
@james.carson
Thanks. It was one of the first things i tried, and just tried again, but it does not solve the issue. I have updates my case with this info.
Case number 01619709.
/Robert