Options

Assign the same IP range from VLAN to a Wifi AP.

AndresDiazAndresDiaz
in Firebox - Networking, Multi-Wan, VLAN, NAT, SD-WAN

Hi, all.

T35W, Sw. Version 12.1.3.B563398

I created 5 VLANS (1, 5, 8,10, 20), all of them with different IP range and DHCP each one enabled. All subnets are visible among them.

I need the Wifi AP gets a valid IP address from VLAN 8 DHCP, because one specific remote Wifi application doesn´t support any other different configuration or IP range.

This application connects remotely (from mobile device connected to the Watchguard Wifi) to a server, and only works with the same IP range of VLAN 8). For example, if IP range is 10.100.8.1/24, Wifi must adquire a IP of this range.

Of course, VLAN structure and application are not changeable or editable (VLAN structure is giving access to a production virtualized environment).

Could anyone help me about the correct configuration?

Many many thanks.

Comments

  • Options
    Bruce_BriggsBruce_Briggs

    Is this for the internal AP on your T35W?
    If so, you set the IP addr for the AP in your GWC settings, such as on the new VLAN page.

  • Options
    AndresDiazAndresDiaz

    Thanks. Finally the solution was setting up the Wifi AP as VLAN interface type and assign it as a second interface to the desired VLAN from that I wanted to get IP DHCP range.

Sign In to comment.