Static Route Redistribution filtering

jlhalljlhall
in Firebox - Networking, Multi-Wan, VLAN, NAT, SD-WAN

Im trying to filter the redistribution of static routes using the following config but it i cant get it to work. All the static routes are redistributed but i only want the 1 static route in the config to be redistributed

redistribute static
access-list STATICROUTES permit 10.0.0.0/24
access-list STATICROUTES deny any
route-map STATICROUTESMAP permit 10
match ip address STATICROUTES

Comments

  • james.carsonjames.carson Moderator, WatchGuard Representative

    Hi @jlhall
    What type of dynamic routing are you using?

    I'd suggest opening a support case to help with this. Get a support file
    -Firebox System Manager, go to status report page, click Support, then retrieve.
    -WebUI, go to system status -> diagnostics, and click to download a support log file.

    The techs can see what the dynamic routing system on the firewall is doing there, and have a better idea on how to help.

    -James Carson
    WatchGuard Customer Support

  • jlhalljlhall

    @James_Carson said:
    Hi @jlhall
    What type of dynamic routing are you using?

    I'd suggest opening a support case to help with this. Get a support file
    -Firebox System Manager, go to status report page, click Support, then retrieve.
    -WebUI, go to system status -> diagnostics, and click to download a support log file.

    The techs can see what the dynamic routing system on the firewall is doing there, and have a better idea on how to help.

    Hi James,

    Its OSPF between Watchguard devices,

    I will generate the support and raise a case.

  • TobyToby

    @jlhall I'm attempting to do the same, did you manage to figure this out with the support team?

Sign In to comment.