credit card term traffic going out wrong firebox
XTM 515 v 12.1.3u3 (old)
M370 v 12.4.1 B595401 (new)
WSM / FSM 12.5.3
We're upgrading our firewalls; we're going from a XTM 515 to a M370.
I recreated the policy's for our CCMachines to duplicate what was in our XTM firewall to our M370.
Just in the past couple of days I changed the 'default' gateway of our CC Machines from pointing to our XTM to point to our M370.
After getting all the users / equipment "default gateways" pointed at my new M370 firewall I shutdown the XTM.
The problem I'm struggling with is the CCMachines won't process cards or do a "Statement Settlement" at the end of the day through the M370.
If I just turn the XTM 'on' without changing any default gateways back to point to the XTM the CCMachines process cards.
So, my CCMachines Default gateway points to my M370 but it's communicating out my XTM.
These terminals are on the same trusted network as my Pc's and those are working fine.
To make the scenario worse one of the CCMachines works, they are all setup to run through the same policy.
** we used to have two XTM 515's, based on the users/equipment default gateway, that would determine which firebox your traffic went out. Now we're using just one firebox and everything uses the same default gateway.
What am I missing here?
Where should I be looking?