trusted network needs access to optional network using a URL
WG M370 v12.4.1 / WSM-FSM 12.5.3
We recently installed a VoIP on-premise system on VLAN B.
Our Trusted Network on VLAN A needs to access the VoIP Server using a URL, which points to our External IP address.
ourcompany.vendor.com:1234/webclient
If I replace the URL with the server IP it works; 172.16.xxx.xxx:1234/webclient
The problem is the instructional papers emailed to everyone will have the URL address and not the IP address.
From the Outside world it works greats but how can I have our Trusted Pc's get to the VoIP server when it's all in the same building?
How can I set this up so that VLAN A (multiple Pc's) can get to Server (single IP) on VLAN B using the URL? Is that possible?
Comments
-
Use internal DNS to point the public FQDN to the internal IP address. Or use loopback to allow the public FQDN to loop back into the firewall.
Gregg Hill
0 -
NAT Loopback and Static NAT (SNAT)
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Fireware/nat/nat_loopback_static_c.html1 -
@Greggmh123
we don't use an internal DNS server so I went with the Loopback.@Bruce_Briggs
Thank you for that link.
I'm not sure what I thought differently this time because I tried that once before and it didn't work, it works now.This time I set the "source IP" to my Trusted Interface IP which I had left out the first time. Argh!
Thanks again for both of your time and comments.
brad0
