Captive portal by T40 Firewall
Good day,
I would like to create a captive portal using the T40 firewall.
The maximum number of simultaneous connections is 60 devices.
I need that every user can access to internet following authentication with a password defined one time.
Each user has the right to a limited data volume to be defined in 24 hours, if the data volume is consumed before 24 hours it must be disconnected.
After 24 hours, the connection must reset automatically and allow access again.
Could anyone help me understand the feasibility and how it can be achieved?
Many thanks
0
Sign In to comment.
Comments
I am not aware of an option in Fireware to do this:
. Each user has the right to a limited data volume to be defined in 24 hours, if the data volume is consumed before 24 hours it must be disconnected.
The Fireware Traffic Management capabilities appear to only be able to control bandwidth usage, not total usage.
You may be able to do some of these things with a combination of the Quotas feature and the Hotspot feature.
See:
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Fireware/authentication/hotspot_configure_c.html
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Fireware/policies/quota_about_c.html
As your device (XTM535) is end of life, it may not have all the features listed here and won't receive any updates. Some features listed in the help docs may end up not being applicable to your firewall.
https://www.watchguard.com/wgrd-trust-center/end-of-life-policy
-James Carson
WatchGuard Customer Support
Many thanks to all.