SSL VPN Clients Cannot Connect To Devices Behind BOVPN Tunnels
Hello all.
We have a M200 Box running v12.5.2 and we now have basically all users working remotely due to COVID-19.
Our main network (yes I know it isn't the best subnet range) is on 192.168.1.0/24 and we have 5 BOVPN Tunnels that are located at 192.168.4.0/24, 192.168.8.0/24, 192.168.12.0/24, 192.168.16.0/24 and 192.168.20.0/24.
I am currently behind the 20.x tunnel and I have a few devices that I would like to have people that are logged into the SSL VPN be able to access.
The SSL VPN Pool is at 192.168.113.0/24
No matter what I do, I cannot get any clients from the SSL VPN tunnel to be able to access anything behind any of the BOVPN Tunnels. I figure this is likely configuration related but I am not sure what to do.
Additionally, everyone can access the 192.168.1.0/24 network just fine. But even BOVPN Tunnel users cannot connect to devices behind other BOVPN Tunnels.
I did log into one of our servers on the 1.x network and I can get to anything that I want behind any BOVPN tunnel.
Just looking for some help on what I might be doing wrong here. Any help is appreciated.
Comments
See my reply to your other post on this.
https://community.watchguard.com/watchguard-community/discussion/899/devices-behind-bovpn-not-able-to-be-accessed-by-other-bovpn-ssl-vpn-users
Thanks @Bruce_Briggs . I cross-posted. I think that your reply in the other thread was the ticket. Thanks!