Trouble with hub-and-spoke routing

Greg_Gilbraith

My core site has a subnet of 192.168.0.0/16 and I just added a site with subnet 192.168.1.0/24, and I have a third site with subnet 10.1.25.0/24. How can I set up VPNs so all three sites can talk to eachother. Can I route the traffic through the core site between the two remote sites?

Adam

Hi Greg,

Watchguard have some great documentation and examples on hub/spoke vpn routing such as below,

https://www.watchguard.com/help/configuration-examples/bovpn_centralized_configuration_example_(en-US).pdf

Although this example is dated it should get you going.

Cheers,
Adam