We recently inherited a private school customer who have an M290 and 15 AP100/200s. The Old AP's worked fine but slow as limited throughput. These units are still all in the Firebox Gateway Config... Using same cabling, VLAN tags etc, plugged in new AP130's, power up, never connect. 1 connected but then disconnected, when…
We are experiencing an issue with the current AP330 firmware where the APs appear to stop passing traffic after a while (as in weeks of uptime as opposed to hours or days). Our solution thus far has been to log into WG cloud and reboot them, but since I have over 100 of them that needed rebooted, I decided I'd like to just…
Does anyone know what happens if an AP is moved/ re-allocated to a different subscriber account? Does AP retain its configuration? Will the Access Point Site the AP belongs to be replicated? Thanks in advance
Hi, Has anyone managed to get dynamic vlan assignment working with cloud WiFi and Radius (Clearpass in this case). If i setup the site to use SSID assigned VLANS they all work individually, but if i set it to assign VLAN dynamically it just sets it to untagged and no IP is assigned. I've configured clearpass to send IETF…
I'm a bit confused about the change deployment process and I'm wondering if it is supposed to work this way. If I make any change to the WIFI settings and deploy the new settings, all SSIDs drop for over a minute and I have to reauth the Guest network captive portal. I am coming from a unifi WIFI system that did not have…
Hello, We have two AP330s in use, each for one part of the building. The problem we are currently experiencing is that the connection to one access point is interrupted from time to time, so that it is not possible to work properly in a meeting room, for example, as you are constantly kicked out of the meeting. Access…
Introduction: I decided to create this topic following the forced migration from the Manage Wi-Fi Cloud platform, which managed our AP325s, to WatchGuard Cloud "Access Point Sites," which now manages our AP330s. Since this migration, although we have occasionally noticed an improvement in speed, the stability of our Wi-Fi…
Hello, First, sorry for my English :-) Are any possibilites for Watchguard implements Social (Google,Facebook etc..) login and/or forcing auth code when people use captive portal login? i have two ap 130 configure with watchguard cloud Everything work ok, but in splash page there are only possibility to configure splash…
Hi there! We are using some AP432 and - like said in the topic - the mDNS hostname not only differs from the "standard" ip/snmp hostnamebut changes from time to time. i.e. hostname: AP022 // mDNS-hostname: AP432-12 (next day or so AP432-039) Is there a way to set mDNS permanently equal to the hostname? Thanks in advance .K.
Hi! Stumbled across a small problem and is wondering if there's some sort of configuration error or design flaw in our setup. We have been using Authpoint Logon app for some time with our office as Safe Zone excluding that network from Authpoint prompts. Since a week ago I've been playing around with Network Access…
It looks like you're new here. Sign in or register to get started.