Comments
-
Maybe support could help you in the meantime but that's how I do it with PI or PA space: set the 195.X.X.13/24 as secondary address on VLAN 100 and in NAT - dynamic nat add an entry with From: any-truster to: any [X] set source ip: 195.x.x.13 and move that rule up in the list to be above the default rules for natting 10./8
-
Drop-in mode or bridge mode is probably what you are looking for. Here is an example on how you would connect your network: https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Fireware/networksetup/net_config_dropin_about_c.html Just as the name says, you put the firewall between your gateway and the…