Comments
-
It appears updating to the latest Chrome version solved the issue
-
Installed the latest Chrome and will see if that fixes the issues
-
I don't. It seems to have cleared itself up. I have updated several machines today without issue.
-
I am starting to see this today with 2 customers. One was obvious. I installed a new server 2022 and when I went to do updates I received an error code. It started to download but then stopped with the code. Firebox traffic log showed IPS blocking it. Created an Allow Anything rule and unchecked the IPs. Updates…
-
They are aware and working on it. https://techsearch.watchguard.com/KB?type=Known%20Issues&SFDCID=kA16S000000gDGsSAM&lang=en_US
-
No, its not set. Won't even let me set it.
-
I think so
-
New Testing. I can confirm that x.x.210.90 is sending the pings to the Sonicwall Firewall and they are working. x.x.222.10 sends it through the Wan on my Main Firewall. It does not get routed over to the Sonicwall. But its able to ping the Sonicwall just fine. Any machine on the x.x.210.x network is able to ping .130. So…
-
I can't say about the 210.90 going straight out to the internet. I want to say no on that. Before using a VPN to the 3rd Party Firewall we were using a T1. It had an address of x.x.210.9 and it worked for everyone. I had a route in the Main Firewall to use that as the gateway for the 25.25.61.130. And everything was…
-
Here is a rough Diagram. There are reasons why I am using the Sonicwall for the VPN instead of the Main Firewall to make the connection to the 3rd Party Firewall. VPN is up. Configured Workstation to use x.x.210.10 as GW and its able to ping 25.25.61.130 for testing to verify VPN is working.
-
Not sure what virtual bovpn is. On the tunnel setup at Site A its configured as follows Local Network - Bi-directional - Any IPV4 Wouldn't that cover it? Basically the VPN is setup to send all traffic over the tunnel. The Main Firewall then receives it and just sends it out the Wan. The tunnel policy was created…
-
Yes, it was the AV itself creating the file. What is VERY bothersome is the fact there is no log telling me what program is having the issues. It tells support, but not me. Its very annoying to have to contact support to figure out what program is causing the issue. Logging seems to be missing from this product. I can't…
-
I agree. Problem is that I can't see what interface it goes out on the traffic monitor. Just shows Syn error. I might have to do a packet capture and see what rule its goes out on. I have a rule that allows anything and it should be going out out our fiber and come back that way too. Still looking.
-
Found the issue. Packets going out one Wan but coming back on the other Wan. Again, nothing changed except the update. Will investigate it further.
-
I misspoke. One site has Fireware 12.7.2 and the other one has 12.8.1. Both connect to the M370 which is running 12.8.1. But still, both Synology boxes are unable to backup to Wasabi. Only change was the firewall update.
-
I can copy files to it over the BOVPN just fine, but the Hyper Backup program on Synology seems to fail backing up to Wasabi. Its the initial connection that fails so the backup doesn't even start. I am going to try backing up a workstation over the BOVPN and see what happens.
-
Backed up fine once I brought it over to the main office. Which means there is something wrong with the BOVPN. There was someone complaining about packet loss in the 12.8 release in regards to BOVPN. Might need to contact support.
-
I stand corrected, I now see a EPDR Forum section.
-
No FIPS since 12.3.1. This could be a problem. Between this, the WIFI costing too much, and still no forum dealing with EPDR, I am starting to think moving away from WatchGuard totally could be a possibility and I really don't want to do that. Thanks for the info.
-
I have to agree with all of these complaints. My main complaint is that the new AP's require subscription to function. Well, I guess they will keep working as long as you don't change anything. At least thats what the docs say. So many other providers providing AP's that don't require subscriptions and have more options…
-
April 2022 and still nothing. Really, how hard is it. The Panda Forum that still exists is completely worthless. I don't think anyone uses it. Spend all that time buying it, branding it, selling it, but can't create an area in your forums for it?
-
Thanks. Tried that. One of the computers is brand new that came with Windows 11.
-
I too have seen a similar issue with Webroot and the SSLVPN. For some reason it was only happening with this user or machine. It would just stop. The sign in and 2 factor would work and as it started to go through its process it would just hang. Reinstalled the machine and it still happened. User is an admin of his…
-
This does need to be addressed. I have purchased it and have run into some issues. I don't want to have to call support all the time.
-
I have already been through this with Duo looking at it. If it is the Firewall I don't think Watchguard will do anything since they recommend using Radius. Why it works fine with one of my clients though is a mystery.
-
Yeah, I have been through all of that. Duo says its WatchGuard but I have the same exact setup at 3 locations. 1 works, the other 2 give double prompts. Switching from AD authentication to Radius does solve the problem. Just bugs me one works and the other 2 do not. I didn't want to add an addition piece (NPS) to the…
-
Switched to using Radius and now its working without the double prompts
-
Thats for Active Directory not LDAP. Maybe I should tell you what I am doing. I am having a problem using Duo with Watchguard SSL VPN. Configuring Active Directory as the authentication server works but I get 2 prompts on the Duo Mobile app to let me in. They asked me to try the LDAP and see if the double prompt happens.…
-
samaccount is not and option for LDAP. Trying uid with fqdn also says username does not exist so the log does not on the server does not show it. Only options is uid, mail or cn. All say user does not exist.
-
Thanks for the Key but its not paired and it will not let me pair either. The error is "You cannot save the configuration for an AP that does not have an active license."