Comments
-
sorry, Yes, ipconfig release and ipconfig renew! I do not have DHCP relay set either. I may have to do a support case for this, I'll keep this updated.
-
we have the laptop plugged directly into interface 7 and we're getting a Management VLAN(10) IP address not a VLAN 50 IP address. Occasionally we'll get a VLAN 50 IP but if we do a refresh it goes back to VLAN 10 I have an Any Packet filter from my Interface 7 To: Any I turned on Logging and this is the only thing I get.…
-
@Bruce_Briggs and @James_Carson Thank you gentlemen for your responses and suggestions. Support case has been opened!
-
@James_Carson I followed the article that Bruce mentioned. I deleted two snapshots and re-provisioned my hdd space. Now that I've restarted Dimension I can't get logged in. My admin/password just blinks and stays at the login. If I use root/password it says 'logging in' but then tells me "Incorrect username or passphrase",…
-
@Bruce_Briggs Yes, that helps. Thank You!
-
James, Thank you for your input!
-
Gregg, Thanks again for the input. At lease it's more food for thought.
-
Gregg, Thanks for that input. I'm just curious what others are using. If anyone had any opinions / experience with good or bad brands.
-
@James_Carson Thank you for that information. I understand the 'no updates' for the older AP's, we're going through major construction, new phone system, etc., they're on my radar, I just need to keep them working until they get replaced. Sooner than later!
-
@James_Carson I thought maybe that might be my recourse, to upgrade, but I'm concerned about older AP's. I'm in the process of retiring 2-XTM 515's for the M370; my first 515 had the current AP's (AP120 and AP125), my next 515 has 5 more AP's associated with it I need to move over and they're older (3 need to be replaced…
-
@Bruce_Briggs Yes, the AP125 is online and Active, it's listed as one of my AP's with the number of clients connected. It just won't list the clients or SSID's associated with it. My Dimension even shows the client traffic in the reports, so it seems the AP125 is working, clients connect and get internet, I just can't see…
-
Thank you Bruce!! (DealerTrack-in-00) route_type="SD-WAN" removed the SD-WAN from that 'in' vpn and all is good. brad
-
Ah! My BOVPN's didn't have any but I have two other tunnels for DT (in and out) they were pointed at my Fiber SD-WAN connection. I'll have to wait until later to switch back over. I'll let you know if that was the culprit. Thanks Bruce.
-
I miss the "old forum" and it's LONG list of history. I had some questions answered and I marked them for reference so that I could easily come back to them if I needed them; now they're gone. I come here looking for answers and there are very few to be found. It appears the amount of participants has drastically decreased…
-
Sorry; XTM 515, 12.1.3u3, AP120 I should turn that off?
-
Thanks Bruce, Your explanation makes sense (you shed some light on my setup) when I look at how things were setup by the people who setup our switches. This might be better as a separate post/conversation.
-
My mistake apparently. While doing some prep work to add additional SSIDs and VLANs to our network, I changed the port mode on our Cisco switches from "Static Access" to "802.1Q Trunk" and that seems to have broken my connection to our Firebox. I thought that should have been the correct setup; I'm new to adding multiple…
-
Thanks Bruce; "Disable auto discovery" wasn't checked so I'll be contacting support on this one, AP325. I did another reset, removed/unpaired the AP200 and now it can't be found. My AP200 is out of support so maybe it's time for a newer one!
-
Bruce, as you said/suggested, I looked back into my logs and found the couple of days my Pc was active with Snapchat. I recall doing some research on those particular days so I'm assuming one of the sites I went to, embedded Snapchat for awhile. or at least while I was there. Not as much of a concern for me now, thanks to…
-
as always, Thank you, Bruce!
-
Bruce, Thank you, as always, for your insightful comments and explanations. My AP is behind my Firebox, I guess I was expecting more in the way of controlling the web traffic with the Cloud WiFi. I have it in place and running, although I had to do a power cycle/reset already this morning. ;o( Just installed and configured…
-
Thanks Bruce, With this new AP I was trying to implement the Cloud WiFi and try the 'new' security features it brings. My questions are about Firewall setup; policies, webblocker, etc., also Application Control. Are those still available with Cloud WiFi? To me it looks like your going back to where you have to setup…
-
So I still control those aspects through the XTM even those it's WiFi Cloud setup? I'll get a better view tomorrow, dept. closed right now, but I didn't see any traffic. Should I have it set for SSID Bridge or Nat mode? Currently this is 'Guest' access with employees using it also. Nat mode I get internet access; Bridge…
-
THANK YOU! Bruce.
-
Bruce, Yes, I was trying to add a Secure WiFi and when I went to activate it I got the message I couldn't because I already had Total WiFi. It even listed my AP200's as Total WiFi! (they didn't have Total WiFi when I activated those!! Since speaking with my Account rep at CDW, he spoke with his Watchguard rep who in turn…
-
Thanks again Bruce, I followed those instructions when I setup our AP120's. I guess my explanation of my question wasn't very clear; So I'll turn this into more of an FYI for anyone setting up WG AP's. As you know you must activate your AP before you can use it; **"Before you can manage a WatchGuard AP with the Gateway…
-
Thanks Bruce, I've seen that page but what I can't find is where it explains once you purchase/activate a security package you cannot add a wifi(AP) with a different security package. They all have to be the same as the first wifi you activated. In other words, if you purchased a Total WiFi AP and you don't utilize it's…
-
YES, please import the 'old forum history'. It was an invaluable resource of material. I always found answers without having to ask questions...aka...someone else usually had the same question before myself and asked the question already. Now there is NOTHING!