Comments
-
Got it. Thanks Bruce. I saw this but wasn't sure if it was related. Thanks as always.
-
@Bruce_Briggs I assume that I would need to do the same for BOVPN networks to the new one?
-
I am dragging the M270 onto the T20 in WSM and then just using the default settings. I am checking all the boxes when it creates the tunnel including expire leases.
-
Well the error is on the M270 side, not the T20 side? The main thing is that I have all kinds of issues with my existing BOVPN's. I have a mix of Cisco RV180s and DLink DSR-250s and they will drop the connection randomly. Sometimes all but 1 of the BOVPNs will re-connect and I will have to reboot the M270 to get the tunnel…
-
I was finally able to spend some more time on this and I seem to always get an error on my main M270 when I am trying to set up the VPN Tunnel between it and the T20. No issues on the T20, but the error that I see says "Failed: Access denied by Firebox - invali..." and I can't see the rest of the error. Any idea how I can…
-
Things are looking better now! I can see the main M270 in the System Manager. However, I now want to set up the T20 that will be behind another firewall for home use. Is there a set of ports that I will need to forward to the T20 so that the System Manager can get to it?
-
Ahh, I do have them in there! I guess that gets me one step closer. Unfortunately I haven't had formal Watchguard training and I am trying to get it to where I can centrally manage Fireboxes for at home users. This process to even get something useable has been hard. Makes me wish I had an once of the knowledge that Bruce…
-
Still having issues with this. I bypassed the step but the issue is that I don't have a license key to add into the software so I am not sure that I can do much. Going back to the part where I cannot connect, is that because I am already behind the firewall? Would this work is the software was installed externally like on…
-
So, I am trying to go through the "WatchGuard Server Center Setup Wizard" where is says "Management Server - Identify the gateway Firebox" and I get to where it asks me to put in the IP of the Firebox. The Server is behind the firebox so I am using the internal IP. I put in the status password as well as the configuration…
-
Only management is via GUI. Is the Management Server a sub-menu of System Manager?
-
Thanks @Bruce_Briggs . I cross-posted. I think that your reply in the other thread was the ticket. Thanks!
-
@Bruce_Briggs I think that it what it is! I am working through this but I was able to get traffic form SSL VPN to my BOVPN. I have some older Cisco RV180 Routers that are being used and I am just working on setting up the proper routes on those, but this is off to a good start. Thanks!!
-
@BrianSteingraber I know that some users have had issues but I have had them change their range at home to something like 192.168.200.0/24 so that they can at least connect to the 1.x network. Do you have a reference point to that documentation? I didn't see it, or at least maybe I wasn't searching for the right thing.