Comments
-
Looks like it stil isn't working. I made a policy using SNAT. it worked yesterday for about 5 calls and this morning the same, no calls coming in. I made the policy as follow: https://voicehost.co.uk/help/watchguard-firewall-sip-configuration
-
GREAT, got it working. THANKS. due to my dummieness I was mixing things up.
-
I was just experimenting on the NAT. I'm only able to make connection to internet with an 1-to-1 NAT with nat base x.x.203.0/24 and real base x.x.2.0/24. If I try x.x.203.0/30 there is no connection if I try to setup an Dynamic NAT, no connection. I made a scheme of the setup, and the problems i encounter. " alt=""…
-
Hi, I have just two IP's on public site x.x.203.1 & 2 (Just to be sure in my amateurism: provider internet IP 94.71.x.x that comes to the modem/router and there I put the modem in DMZ with IP x.x.203.1 and direct to the x.x.203.2). I use the Web UI for setup So if I understand right, setup an SNAT and use this SNAT in the…
-
Hi Bruce, I setup the NAT (but I'm a bit of an amateur ;-) on this). Perhaps you can help me out here. I made the setup as following: Orange modem/router IP x.x.203.1 (no port forwards here) put this router in DMZ pointing to x.x.203.2 In the firebox I conf. the interface as mixed routing external x.x.203.2/30 trusted…
-
I think, I just figured out what the problem was. An answer in an other post (domotica) about configuring the NAT. I just configured the NAT 1 to 1 and it seems that was the trigger, the PBX is working now 5 times in a row, hope it lasts. Thanks,
-
I didn't have the NAT configured. I just configured the NAT 1 to 1 and I think this was the trigger. The VOIP (other post) just worked. Thanks