Comments
-
Hi Guys Manage to clear all the hole and save the file successfully into the firebox! thank you once again!
-
Hi Guys one last question. I am using the policy manager to open my XTM 515 configuration file and as advice i went to Setup-OS Compatability and select 12.0 and higher. When i try to write it to the new firebox i have the below prompt The OS version of the Firebox or configuration file does not support the configured…
-
Hi Guys I will like to thank everyone of you for your unselfish help and responses,especially Bruce! I was able to recover the box OS by using the wizard. Once it reboot I was able to access the Web UL as per normal. Appreciated and once again Thank you!
-
Hi All I cant thank you guys enough. I manage to get the firebox into the recovery mode and i can manage to access it using system manager. so I am going to try to run the setup wizard (finger cross)
-
Hi Sorry, but isnt it identical? Reset firebox 1.Power off the Firebox. 2. Press and hold the Reset button on the front left of the device, and briefly press the Power button on the front of the device to power it on. 3. The Arm indicator is red. 4. Continue to hold the Reset button while the Arm indicator ( Shield symbol…
-
Hi I was told by the support I can actually open the configuration file using policy manager and change the OS version. not sure if this the correct step?
-
Hi There Am i right to say that the recovery mode is the same as the reset default factory mode? The step look identical