Comments
-
Here's the screenshot: screenshot
-
I tried to do simple port forwarding on my laptop exposing port 80 for example and finding out the public IP via enabling DDNS but the public IP seems not to respond to any connection to any port.
-
Hi Greggmh123, this is what I can see from the "Internet" section of the router. Even in the remote management section you can see the pre-filled URL you're supposed to go to when remote managing the router (if enabled) showing the same private IP address.
-
I also wanted to have VPN SSL failover but I could not get any incoming connections to reach Firebox. So in case it might help somebody, in my case the 4G router showed a private IP address in the connection information page. That means the SIM card used is only meant for browsing the internet and does not accept incoming…
-
Hi all, in case it might help somebody, in my case the 4G router showed a private IP address in the connection information page. That means the SIM card used is only meant for browsing the internet and does not accept incoming connections so DMZ and port forwarding will not work unless you call the ISP and tell them your…
-
@4QC_Support Hi, did you have to put additional forwarding on the firebox? I'm in the same situation and using a Firebox T50-W and a TP-Link Archer MR600. On the firebox I put on port as external interface and set it with IP 172.31.1.2 and gateway 172.31.1.1 On the tplink I put as LAN address 172.31.1.1 and as DMZ host…
-
It works, thank you very much.
-
Hi, thank you very much it works now. Web interface is seriously buggy though, it shows inconsistent data compared with WSM.
-
I can remove and edit users with WSM but at the time of upload it asks for the feature key which just expired. Does feature key's expiration keeps you from editing users?
-
I'm using Web UI, do you mean Watchguard System Manager 12.5.2 ?
-
That's exactly the menu item I use and when I select a user edit and remove buttons are disabled