IKEv2 W10 client connects but no default gateway and /32 netmask

I just tried (again) to configure IKEv2 muvpn for W10 clients. Used the wizard and took everything default.
Client connects without problems. But I can't reach anything.
Client gets a 192.168.114.2 ip, a 255.255.255.255 netmask, no default gateway, and the ips of my internal DNS.

route print
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.0.1 10.0.3.21 4280
0.0.0.0 0.0.0.0 On-link 192.168.114.2 46
10.0.0.0 255.255.252.0 On-link 10.0.3.21 4536
10.0.3.21 255.255.255.255 On-link 10.0.3.21 4536
10.0.3.255 255.255.255.255 On-link 10.0.3.21 4536
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4556
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4556
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4556
192.168.114.2 255.255.255.255 On-link 192.168.114.2 301
194.78.35.10 255.255.255.255 10.0.0.1 10.0.3.21 4281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4556
224.0.0.0 240.0.0.0 On-link 10.0.3.21 4536
224.0.0.0 240.0.0.0 On-link 192.168.114.2 46
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4556
255.255.255.255 255.255.255.255 On-link 10.0.3.21 4536
255.255.255.255 255.255.255.255 On-link 192.168.114.2 301
===========================================================================
Persistent Routes:
None

I tried with adding the 192.168.114.1/24 network to a trusted interface, but to no avail.
I can't get my head around a /32 mask so I guess I miss something.

So I'm stuck, anyone an idea where I went wrong?
Thanks, Patrick
M200, OS v12.5.2.B609628
W10 1909 Enterprise

Comments

Sign In to comment.