Move vlans to LAG
Dear Members,
I manage an M270 and need to migrate a single uplink with multiple vlans to a LAG. I have created the LAG from 2 unused interfaces sucessfully and for testing I created a new vlan in the VLAN section and selected it to be active on the LAG (checked the tagged traffic box for the LAG). This works as expected and the vlan is active in the LAG, I can see the mac address in that vlan on the port-channel of the switch and ping it from a host in the test-vlan.
I now need to move the existing vlans from the single link to the LAG. I thought it was as easy as checking the "no traffic" for the single interface and check the "tagged traffic" for the LAG. However, if I check these boxes and click "save", the GUI waits for about 10 seconds and my session shows "your session has expired" and I need to login again. If I do so and navigate to the same page, there was no modification made.
In the picture below I want to migrate VLAN10 from "uplink-2" to "aggregated uplink"
How can I migrate existing vlans to the LAG?
Thanks,
Mike
Comments
Are you connecting to the Web UI from one of the VLANs that you are trying to move?
You should be able to do this easily using WSM Policy Manager since you are not connected live to the firewall while making the changes.
You upload the changed config after all changes have been made.
Thanks! I will try it from the policy manager. I am connected on a different network (untagged management network on interface 1). From the web UI this change seems to fail though. It feels like a bug.