Bought an old M200, can I get the software?

JerryDM

So I purchased an old M200 Firebox for a bit of self-education (coming from a Cisco background).

I tried to reset to factory default to start from a known state and when I run the quick setup wizard from WSM 12.10.4 it tells me I need 11.9.6 or higher (but not too high, obviously!).

I can't seem to find V11 anywhere, is it possible to get a copy here? Ideally I'd like to get it up to V12, but just getting a working system would be a start.

Any help would be appreciated.

Bruce_Briggs

You need to register this firewall with your account via Customer Care in order to get a Feature Key, which is needed to use more that 1 internal IP addr to access the Internet amongst other things.
Creating a login ID on the Support Center creates your account.

Open a support case using the Support Center link above.
Select type = Customer Care
Ask for the firewall to be registered to you.
Ask Customer Care for a link to V11.9.6 or so WSM.
Upload a picture of the serial & model info of your firewall.

james.carson

Hi @JerryDM

You can find 11.9.6 here:

(Fireware 11.9.6 Update 1)
https://cdn.watchguard.com/SoftwareCenter/Files/XTM/11_9_6_U1/Firebox_OS_M200_M300_11_9_6_U1.exe

(Fireware 11.9.6 Update 1 Sysa-dl for OS updates from the Web UI)
https://cdn.watchguard.com/SoftwareCenter/Files/XTM/11_9_6_U1/firebox_M200_M300_11_9_6_U1.zip

WSM 11.10.1 was the version in use when Fireware 11.9.6 update 1 came out:

(WatchGuard System Manager 11.10.1)
https://cdn.watchguard.com/SoftwareCenter/Files/WSM/11_10_1/WSM11_10_1.exe