M290 with 2 port SFP+ module installed
Will i be able ot use the teh SFP+ ports A0 and A1 as regular interfaces?
I plan on bringing my isp fiber port to the watchguard port A0 (eth8) and it seems i read something stating it was not a regular interface.
0
Sign In to comment.
Comments
Hi @Sam_Cotton_01
It depends on what module you're using. If your module only has two ports, it's probably this one:
-WatchGuard Firebox M 2 x10 Gb SFP+ Fiber Module (WG9020)
It will only accept 10Gb SFP+ modules (so you can't mix a 1Gb module in, for example.)
See the article here for more information on what each module supports:
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-m290-390-590-690-hardware-guide.html
The ports can be set up as an interface just like any other interface -- what module is being used is the main factor.
-James Carson
WatchGuard Customer Support